How to take apart iBuyPower case?


What is an iBUYPOWER or IBuyPower PC anyway? Also, how do you take apart the case of such a PC? Keep on reading this article to find out about this and more!

You can get a special desktop case that mirrors your unique style, such as iBUYPOWER or iBuyPower PC tower cases. Every PC case from the MR Series of iBuyPower features unique designs and aesthetics upon closer inspection.

With that said, do you know how to take apart the iBuyPower case? Keep on reading to find out! Also, on a side note, the Mirror Case line of iBuyPower has aspects to it that make its cases more removed than other standard cases.

How to Take Apart iBUYPOWER Case

Taking apart the iBuyPower case varies on a “case-by-case” basis (pardon the pun), but to generalize, they usually follow similar steps of removal. Use a flathead screwdriver to remove the screws. It mostly works like how you’d take apart a normal PC case.

Just watch out for things like fans, extra aesthetic lights, and whatnot that require disconnection. Also, don’t forget to turn off your PC before disassembling it for cleaning or for installing new cards or chips on the motherboard.

Unscrew the Side Panel and Pull the Front Panel Tabs

You can open the iBuyPower case by removing the right-side panel, locating the three tabs securing the front panel to the computer, and pulling the front panel tabs out slightly, away from the PC, in order to release the panel.

Now swing the front panel opens to the left then lift the panel off of the computer. To put it back together, go in reverse. Put the front panel back first then the side panel next.

How to Clean the iBUYPOWER Case

The iBuyPower Element Mirror Case in particular is easy to clean because it comes with its own magnetic dust filter at the top of the case as well as an undercarriage removable dust filter right below. The dust filters allow you to easily clean out the case without taking it apart. Read more.

Dust Bins Allow for Easier Cleaning

You can also easily detach the front panel of this brand of case by pulling at it until it releases its grip. It’s through this unique design that you’re able to keep dust from caking on the inside of your computer.

Use compressed air instead of a vacuum to remove the dust from within your desktop PC tower When using a brush to remove the grimier and stickier particulates, do so with gentle brush strokes to avoid scratching and destroying the inner circuitry.

What the iBUYPOWER Cases Bring to the Table

The Mirror Series iBuyPower cases in particular showcases your PC tower’s internal circuitry and motherboard to keep tabs on how clean it is and if everything is in perfect working order as opposed to standard black or white cases where almost everything is hidden.

The Trace, Slate, and Element MR series of PC gaming cases were designed with an eye for gamer aesthetics even though it can also house non-gaming PCs just fine. You’ll get to enjoy tempered glass side panels, gorgeous RGB internals, and a partial mirror finish to boot.

Q&A

How do I remove the iBUYPOWER power supply cover?

How to Replace PSU on PC – iBUYPOWER

How do I clean my iBUYPOWER Tower?

How to Clean Your PC | Computers and Coffee

How do you clean dust out of a gaming computer?

How to clean your PC

  1. Unplug the PC and disconnect everything.
  2. Open up the PC using a screwdriver.
  3. Grab a can of compressed air and blow out debris.
  4. Wipe down surfaces.
  5. Perform this service around once every couple of months.

How do you remove the glass from a gaming computer?

How To Remove Glass Panel on Corsair 4000 and 5000 Series Cases

How do you open a gaming PC case?

If there is no thumbscrew to remove, the case likely utilizes a button to open it.

  1. Find the button, often on the front-bottom portion of the computer case.
  2. Press the button to release the side of the case, allowing it to be removed.

How do you remove a computer case?

How to Open Any Computer Case

How do you clean your computer case?

How to clean up your PC tower

  1. Convenient cleaning area.
  2. Empty the inside of the PC tower.
  3. Plug in the hair dryer to blow out the dust.
  4. Brush the surface of the components (gently) with a brush.
  5. Wash the filters under running water (not too hot) and dry well.
  6. Reassemble.

Can you vacuum the PC case?

Don’t use a vacuum cleaner. A vacuum can create static electricity that can damage computer components.

How often should you dust your PC?

Heat is your computer’s worst enemy. Over time, dust buildup inside your computer could undermine its cooling efficiency, resulting in shorter life spans for your computer’s components. To help keep your computer running cool, clean the inside of your computer every 6 to 12 months.

How do you clean computer case fans?

To clean the case fans, you can use the compressed-air can and give ’em a good blasting, or you can use rubbing alcohol gently applied to a cotton swab, paper towel, or toothbrush (I’m not kidding, a toothbrush works great for scrubbing dust and gunk from the fan blades themselves).

Should I open my PC to clean it?

To keep your PC clean, sanitary, and running smoothly, give each component a cleaning on a regular basis. It’s a good practice to open up your computer and follow the cleaning process at least every three to six months.

How do I remove the Ibuypower glass panel?

There’s an opening on the top behind that front glass panel. Turn the computer off, and just reach down there with your finger, catch the little notch that sticks out in the center, pull it back toward the glass, and the whole screen comes right off.

How can I open my PC?

How To Open And Clean A Computer

What tool can loosen computer casing screws?

Torx screwdriver: Used to tighten or loosen screws that have a star-like depression on the top, a feature that is mainly found on laptops.

How do you open a CPU case?

Computer Cases

Do you need to clean your gaming PC?

Routine cleaning and maintenance are important to the health of your gaming PC. We recommend using compressed air every three to six months to prevent dust buildup from impacting your PC components.

What are the tools needed in cleaning computer casing?

Here’s a quick list:

  • Microfiber cloths.
  • Water.
  • Compressed air.
  • Isopropyl alcohol or glass cleaner.
  • Computer screen cleaning wipes.
  • Q-tips.
  • Screwdriver.

Points to Ponder

The iBuyPower Element Mirror Case comes with a familiar flat face while the Trace and Slate Mirror Cases offering 3D crystal shapes. They’ve constructed the Slate MR with three distinct and asymmetrical tempered glass panels.

As for the Trace MR, it offers clean edges that connect or join to form a more symmetrical trapezoidal shape. Regardless, in order to remove the side or front panels of such cases, you need a screwdriver unless you only need to pull the front panel until release.

References:

  1. iBuyPower – The All-New Mirror Series“, iBuyPower.com, Retrieved May 15, 2022
  2. Product Overview: iBuyPower Signature Mirror Series“, iBuyPower.com, August 5, 2020

Andy Avery

I really enjoy helping people with their tech problems to make life easier, ​and that’s what I’ve been doing professionally for the past decade.

Recent Posts