How to fix device not migrated on Windows 10?

Windows 10 updates may lead to some issues, one of the most common of which is the “device not migrated” error on Windows 10. This issue may happen on your USB drive, hard drive, microphone or monitor among others.

In this guide, we will show you the different ways to fix devices not migrated on Windows 10 error.

One of the reasons for the device not migrating error on Windows 10 is a result of a partial or ambiguous match.

Method 1: Check your computer’s USB slots

As most computer peripherals are connected through the USB ports, checking your USB slots is one of the most basic steps to fixing the error. Do the following steps:

  1. Check every slot and ensure that it is clean. You may clean the USB slots with a dry cloth.
  2. Check if all the connectors are properly connected. If a peripheral is not properly connected due to a damaged USB port, you may have to find another available port or have the damaged port fixed.

If your USB slots are working fine, try the next method.

Method 2: Install Windows Updates

If the device not migrated on Windows 10 error is caused by Windows updates, there is no other way to fix it but to install the latest updates.

How to Install Updates on Windows 10 video

If the problem persists even after installing the latest Windows updates, try the following method.

Method 3: Reset your BIOS Settings

Use this method if you can’t migrate the Generic PnP monitor after a system upgrade. You may have to update the BIOS version, or if it won’t work, reset it back to default.

  1. Open Windows Settings and go to Update & Security settings.
  2. On the left side of the window, click Recovery > Advanced > Restart now.
  3. After the system restarts, you should see the blue Advanced Startup screen.
  4. From the Advanced Startup screen, click Troubleshoot > Advanced options > UEFI Firmware Settings.
  5. The next screen you should see is the BIOS settings on your computer. From there, you’ll need to find the option to reset the BIOS settings. Depending on the motherboard brand, the option to reset may read as Load Default, Load Setup Defaults or similar.
  6. A window will prompt. Then choose Yes.

Method 4: Uninstall and install problematic drivers

A different range of problematic drivers might also cause the migration issue. Follow these steps to fix it:

  1. Launch Device Manager.
  2. Select the correct device category to easily find the device and its driver.
  3. Once found, right-click on the device then click Uninstall device.
  4. Check the Uninstall driver option from the driver context menu.
  5. A window will pop out and from there, click Uninstall.
  6. To reinstall the driver, select Action from the menu bar and choose Scan for hardware changes.

Method 5: Make use of System Restore

The System Restore function is like the undo button when installing drivers in your computer. It restores your system to a saved state with a properly functioning configuration.

However, to use this method effectively you must have created a restore point manually or have tasked it automatically before you encountered this device not migrated issue.

You could watch this video on How to do System Restore:

Q & A

How to fix devices not migrated on Windows 10?

There are different ways to fix this issue depending on what you think is the cause. You could  start with the first and second methods as they are typically effective in resolving the problem. If not, try the rest of the methods we mentioned in this guide.

Why is my device not migrated?

You should know each driver needs to be migrated if you want it to run on your computer properly after the update. If your device could not be migrated, it is likely that the migrating process goes wrong. And in the process, the most common issues are driver incompatibility and file corruption.

What is device not migrated Windows 10?

Here are some common reasons why the “Device was not migrated due to partial or ambiguous match” error occurs: You have installed two operating systems on the same computer. You had an older Windows version before upgrading to Windows 10. Crucial OS files are damaged and need repair.

How do I fix Windows 11 not migrated?

What can I do if my device settings have not been migrated on Windows 11?

  1. Press the Windows + I keys simultaneously to open Settings.
  2. Search for Device Manager and click Open.
  3. Navigate to your selected driver, right-click and select Update Driver Software.
  4. Restart your device.

What is not migrated due to partial or ambiguous match WD?

One of the ways to fix the device USB was not migrated due to partial or ambiguous match issue is to use another USB port on your computer. If your hard drive is connected via USB, use a different port and see if that works. If your older port has an issue, this should fix it for you.

What does mouse not migrated mean?

If a device shows the error “Device is not migrated”, it can be caused by damaged or non compatible drivers. Also, some users are using third party tools to update their drivers (which can cause such conflicts, and isn’t recommended).

What does device migrated mean in Windows 10?

It means what it says. For example, the settings for all the device drivers can be migrated to the target Windows and set but not the actual drivers (which need to be installed fresh on the target Windows if they are not part of the OS).

What is the meaning of not migrated in GST?

Taxpayers who have not activated their Provisional ID, issued by their tax department, will not be able to migrate to GST, and will have to take fresh registration, now. GOODS AND SERVICE TAX NETWORK.

How do I fix device settings not migrated?

Fixing the Device Not Migrated Error On Your Windows 10 Computer

  1. Check the USB slots on your computer.
  2. Install the Windows updates.
  3. Reset your motherboard’s BIOS settings.
  4. Update the existing BIOS version.
  5. Update the Chipset’s functioning drivers.
  6. Uninstall the problematic driver and reinstall it.

Why does my laptop say USB device not recognized?

The various reasons for USB device not recognized error are as follows: The drive software couldn’t completely load in the system. The drive may contain any malicious file; therefore, the system doesn’t read it. Due to the low system battery, the Root hub settings may have unrecognized the drive.

Can I go back to Windows 10?

You can go back to Windows 10. That’s right—even if you bought a computer with Windows 11 pre-installed, you can ditch Microsoft’s latest operating system. The process just varies depending on how you got Windows 11.

How do I enter BIOS?

To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.

What is Generic PnP Monitor Windows 10?

Generic PnP monitor means your computer is using generic drivers for the display attached. … Instead, it is using generic drivers and your display is categorized as Plug n Play monitor with no access to additional settings.

What does device install requested mean?

It’s when Windows identifies a device and then adds a driver for it.

How do you get into the BIOS in Windows 10?

To enter BIOS from Windows 10

  1. Click –> Settings or click New notifications.
  2. Click Update & security.
  3. Click Recovery, then Restart now.
  4. The Options menu will be seen after executing the above procedures.
  5. Select Advanced options.
  6. Click UEFI Firmware Settings.
  7. Choose Restart.
  8. This displays the BIOS setup utility interface.


There are different ways on how to fix devices not migrated on Windows 10. However, identifying the possible cause is crucial to solving this issue. Once identified, you can then refer to the applicable method to fix the problem from the source.

Andy Avery

I really enjoy helping people with their tech problems to make life easier, ​and that’s what I’ve been doing professionally for the past decade.

Recent Posts